Yellow STAR 10 powered access platform during indoor training at Harris Safety Training Services

Choosing a MEWP: working height is only the starting point

Choosing a MEWP needs a complete task brief. 'We need to reach eight metres' is a useful opening to a hire enquiry. It is not a complete specification. A machine might reach the required height but be unable to reach the work from a suitable position, enter the building or operate within the available space.

Specify the task, reach and load

Begin with the task itself. Where does the person need to stand to carry it out without improvising their position? Is the work directly overhead, or beyond an obstruction? Height, horizontal reach and any up-and-over requirement need to be considered together. An overall height figure alone cannot answer those questions.

Then consider what will be on the platform. People, tools and materials all contribute to the load, and the size of materials can affect the work arrangement. Describe the actual task to the supplier instead of assuming a larger platform automatically provides the right solution. The manufacturer's limits still govern the selected machine.

Getting the machine to the job is a separate planning question. Note gateways, doorways, turns, slopes and delivery arrangements. Gather reliable information about the surfaces and supporting structure. A route that looks clear in a photograph may still contain restrictions that a site visit needs to establish.

Assess the work area before selection

Think about the work area as it will be when the job happens. Stored materials, other trades, pedestrians or vehicles may occupy space that is empty today. Include those interfaces in the assessment, rather than treating the MEWP as an isolated piece of equipment.

A useful supplier enquiry combines a brief task description, measurements, photographs and the known site restrictions. Identify uncertainties plainly: for example, 'floor capacity still needs confirming' is more useful than an unsupported estimate. Ask for a competent assessment where the situation needs one.

This preparation can expose an unsuitable choice before delivery and creates a clearer basis for selecting both equipment and training. Record why the chosen machine fits the work so that a later change of task or location prompts a fresh discussion.

Turn MEWP selection information into a usable handover

Distinguish information that has been checked from information that is still an estimate. A marked-up plan can show the proposed work position and access route, while a separate note lists outstanding floor or ground questions. Ask who is responsible for obtaining each answer. The equipment supplier needs an accurate description, but responsibility should not disappear into a vague assumption that somebody else has assessed the site.

Consider a repair above an obstruction. Two machines may offer similar headline working heights, yet differ in how the platform reaches the position and what space the chassis needs. Ask the supplier to explain the relevant operating envelope for the actual load and configuration. Do not substitute a brochure photograph for the model information needed. The objective is to establish a suitable working position within the machine’s limits.

Plan the handover if the hired equipment changes. A replacement model may alter access dimensions, loading or operating characteristics. Check the revised specification against the site brief before accepting it for the task, then arrange the appropriate familiarisation. Keep the reason for the final selection with the work plan so the supervisor can recognise when a later change requires another review.

Businesses planning powered-access work near Newark can discuss relevant training with Harris Safety. Explain whether the learning need is for the person selecting equipment, the manager coordinating work or the operator. Harris Safety lists MEWPs for Managers within its IPAF training offer, and can discuss appropriate arrangements for your enquiry. Confirm the particular course and venue before booking. Good preparation produces a useful equipment brief and a clear training request, while leaving technical site decisions with the people competent to make them.

If your team selects or supervises powered access, ask Harris Safety about MEWPs for Managers training.

Further guidance